IEC-62056-21 Tcp Master
Parameters
| Parameter | Datatype | Default Value | Description |
|---|---|---|---|
| DEBUG | enum | 0 | Enable debugging |
| DUMP | enum | 0 | Enable communication dump |
| PEER_ADDRESSES | list_of_inet_addr | Destination TCP/IP hostname:port, separate multiple entries with comma | |
| SCAN_PERIOD | float | 30 | Scan period [s] |
| RESPONSE_TIMEOUT | float | 20 | Response timeout [s] |
| RECONNECT_DELAY | float | 10 | Reconnection delay after connection lost |
| UTC_TIMESTAMPS | enum | 1 | Transmit/receive timestamps in UTC timezone |
| DISCONNECT_AFTER_READOUT | enum | 0 | Disconnect after readout |
Measurements
This stack supports measurements.
Measurement address
Type: regex
Description:
[<OBIS.A>-<OBIS.B>:]<OBIS-C>.<OBIS-D>.<OBIS-E>[*<OBIS-F>]
where:
<OBIS.A> - medium type (0 - generic, 1 - electricity, 4 - heat cost allocator, 5 - cooling, 6 - heat, 7 - gas, 8 - water, 0 - hot water)
<OBIS.B> - channel
<OBIS.C> - physical quantity (current, voltage, energy, level, temperature, ...)
<OBIS.D> - quantity computation result of specific algorithm
<OBIS.E> - individual components of the measurement defined by codes A..D
<OBIS.F> - unit/tariff/billing period
Examples:
1.8.0 - Imported energy in kWh
1.8.0*51 - Imported energy in kWh in period 51
1-0:1.8.0 - Electricity, channel 0, total active energy consumption
Commands
Commands are not supported on this stack